|
| Title: |
Pusher engine in the middle of nowhere |
| Description: |
|
| Photo Date: |
4/4/2004 Upload Date: 4/4/2004 8:29:03 PM |
| Location: |
Woodlawn, SC |
| Author: |
Tim Huemmer |
| Categories: |
|
| Locomotives: |
CSX 162(AC44CW) |
| Views: |
702 Comments: 0 |
|
|
|
| Title: |
Stuck in the hole for a long time |
| Description: |
|
| Photo Date: |
5/29/2004 Upload Date: 5/29/2004 9:21:33 PM |
| Location: |
Sevier, NC |
| Author: |
Tim Huemmer |
| Categories: |
|
| Locomotives: |
CSX 162(AC44CW) |
| Views: |
497 Comments: 0 |
|
|
|
| Title: |
Waiting... |
| Description: |
While crews work on the CTC installation at S Irby, a couple of freights have to wait for them to take a break! |
| Photo Date: |
10/28/2006 Upload Date: 10/30/2006 7:59:08 PM |
| Location: |
Irby, SC |
| Author: |
Tim Huemmer |
| Categories: |
Action |
| Locomotives: |
CSX 162(AC44CW) |
| Views: |
327 Comments: 0 |
|
|
|
| Title: |
Changes at the turnout |
| Description: |
CTC will also be installed at the CN&L turnout. The old signal and new southbound signals are seen standing beside each other. The new northbound signal for the C&WC is laying on the ground. This CTC installation will replace the current setup which is a 'self-restoring turnout'. The normal turnout position routed for the CN&L, so crews wanting to stay on the C&WC must walk up to the signal and turn a key switch to actuate the turnout. A medium clear indication is shown on the signal once the turnout is thrown for the C&WC. After the train passes, the switch will return to its normal postition. This setup was installed about 10-12 years ago I believe |
| Photo Date: |
10/28/2006 Upload Date: 10/30/2006 7:59:10 PM |
| Location: |
CNL Turnout, SC |
| Author: |
Tim Huemmer |
| Categories: |
Action |
| Locomotives: |
CSX 162(AC44CW) |
| Views: |
366 Comments: 0 |
|
|
|
| Title: |
New CTC at the S end of Ora Siding |
| Description: |
Perhaps the oddest of the new CTC installations is here at Ora. The N end of the siding will have a spring switch (installed 5-7 years ago) while the south end will have CTC. This will be the termination of a stretch of CTC between Irby and Ora -- about 7 miles or so. Note the northbound signal only has 1 head. My guess is either an approach or restricting will be displayed to indicate movements into the siding. At the time this photo was shot, the signals had been erected, but power switch has not been installed here. This may be my last photo of the old switch stand here |
| Photo Date: |
10/28/2006 Upload Date: 10/30/2006 7:59:11 PM |
| Location: |
Ora, SC |
| Author: |
Tim Huemmer |
| Categories: |
Signal,Action |
| Locomotives: |
CSX 162(AC44CW) |
| Views: |
337 Comments: 0 |
|
|
|
